FLO-ROK® FR5 MAX - 28 oz. Injection Anchoring Adhesive
- FLO-ROK® is not recommended for overhead applications
- Store cartridge at +5C° to +25C° before use
OVERVIEW
UCAN FLO-ROK® FR5 MAX is a styrene free epoxy acrylate adhesive that incorporates the latest technology in adhesive anchoring. The unique properties of the two component, high strength anchoring adhesive provide low stress fastening. FR5 MAX is an excellent choice for anchoring & dowelling and is ideal for use in a wide range of temperatures from -20°C to over 30°C. A matching static mixing nozzle, as well as FLO-ROK ’s low mix ratio sensitivity, ensures thorough, 10:1 mixing of the resin and the hardener. FR5 MAX is available in 2 sizes - 10 oz., and 28 oz. cartridge perfect for high volume applications such as rebar dowelling. UCAN FLO-ROK® FR5 MAX anchoring adhesive is specifically formulated for continuously threaded steel rod and deformed steel reinforcing bar anchoring to resist static, wind or earthquake (Seismic Design Categories A through F) tension and shear loads in cracked and un-cracked, normal-weight concrete having a specified compressive strength, f ’c, of 2,500 psi to 8,500 psi (17.2 MPa to 58.6 MPa). The FLO-ROK® FR5 MAX adhesive anchors are designed to be used for floor (vertically down), wall (horizontal) anchoring applications.
FEATURES
- ACI 318 Category 1 anchor (continous spec. inspection) for cracked & uncracked concrete
- Tested in accordance to AC 308 for long term sustained load at standard and elevated temperature.
- Seismic resistance
- User friendly, low odour, styrene free & MMA free
- Meets LEED guidelines; low VOC
- Moisture insensitive, non sag formula
- Suitable for damp and water filled holes
- Shelf life 1 year, store cartridge at +5°C to +25°C before use
- Meet CSA A23.3-14, Annex D requirements
APPLICATIONS
- Rebar dowelling
- Highway and bridge construction
- Machine, crane and hoist installation
- Hollow wall anchoring applications
- Renovations
Weight (lbs.) | 5.300000 |
---|---|
Brand | UCAN |